Characteristics of branch Holder Material

- Sep 03, 2019-

Molding characteristics

One of the important part of plastic display is our holder,the material of the holder is PVC,so what characteristics of holders? 

1. Amorphous material, low moisture absorption, poor fluidity. In order to improve fluidity and prevent bubbles, the plastic can be pre-dried. The mold casting system should be short and thick, the gate section should be large, and there should be no dead angle. The mold must be cooled and the surface should be chrome-plated;

2. Due to its corrosive and fluid characteristics, it is best to use special equipment and molds. All products must be added with different types and amounts of additives as needed;

3. It is easy to decompose. It is more easily decomposed with steel and copper at 200 °C, and it escapes corrosion when decomposed. Irritant gas. The molding temperature range is small;

4. When using the screw injection machine nozzle, the hole diameter should be large to prevent dead angle stagnation. It is best not to have inserts, if there is an insert, it should be preheated.