Plastic Display Shelf For Medical Products

Product Details

Product Specification

Details of Plastic Display shelf

1.What's the material of picture board: The head card is use PVC foam board, Some customer will use KT board (more light).

2.What's the material of Plastic tube: Plastic tube, you can choose color in pantone book, also can use transparent tube. tube height can make more shorter or more longer. it's depond on your products heights.

3.What's the material of Plastic tray: you can use PP or HIPS.  You can screen print on the tray front, two sides and back. some client will choose 1 color, some will choose 2-3colors, It's ok.

4.What's the material of connecting strip: How to contact the board to tubes. The hook&loop paste. we have many width type, such as size 1cm, 1.6cm, 2cm, 3cm, 5cm, 7cm.

Also we can make hole on the tube, and use plastic nail install.

5.We have shelves with many kinds of sizes, below are some of our products.  Multiple sizes, multiple designs, so that customers have more choices.

Compared with other materials, plastic has the following performance characteristics.

1. Light weight

Plastics are lighter materials with a relative density between 0.90 and 2.2. Obviously, can plastic float to the surface? In particular, foamed plastics have a lighter texture and a lighter density of only 0.01. This property allows plastics to be used in the production of products that require a reduction in their own weight.

2. Excellent chemical stability

Most plastics have good corrosion resistance to acids, alkalis and other chemicals. Especially known as the plastic king of PTFE (F4), its chemical stability is even better than gold, put in "Aqua regia" boiled for more than ten hours will not deteriorate. Due to its excellent chemical stability, F4 is an ideal corrosion resistant material. For example, F4 can be used as a material for conveying corrosive and viscous liquid pipes.

3. Excellent electrical insulation properties

Ordinary plastics are poor conductors of electricity, and their surface resistance and volume resistance are very large, which can be represented by numbers to 109 to 1018 ohms. The breakdown voltage is large and the dielectric loss tangent is small. Therefore, plastics have a wide range of applications in the electronics and machinery industries. Such as plastic insulated control cables.

4. Poor conductor of heat, with noise reduction and shock absorption

In general, the thermal conductivity of plastics is relatively low, equivalent to 1/75 to 1/25 of steel. The micropores of foams contain gas, which is better in heat insulation, sound insulation and shock resistance. For example, the thermal conductivity of polyvinyl chloride (PVC) is only 1/357 of steel and 1/1250 of aluminum. In terms of heat insulation capacity, the single glass plastic window is 40% higher than the single glass aluminum window, and the double glass is 50% higher. After combining the plastic form with the insulating glass, it is used in residential buildings, office buildings, wards, hotels, saving heat in winter and saving air conditioning costs in summer. The benefits are obvious.

5. Wide mechanical strength distribution and high specific strength

Some plastics are as hard as stones, steel, and some are soft like paper and leather. From the mechanical properties of hardness, tensile strength, elongation and impact strength of plastics, the distribution range is wide, and there is a great choice for use. Because of its small specific gravity and high strength, plastics have a high specific strength. Compared with other materials, plastics also have obvious disadvantages, such as easy burning, low rigidity, poor aging resistance, and heat resistance.

Maintenance of plastic products

Many plastic products in daily life have a shelf life. If you don't have good maintenance, it will release some harmful substances, and enter the body with food or drinks, and then cause the body. Injury, so the maintenance of plastic products is also very important. When people use plastic tools, they often encounter such a situation, plastics become hard, brittle, discolored, cracked and performance degradation, which is plastic aging. Or I have heard that plastics companies have added some anti-aging agents in the manufacturing process to slow down their aging, but this has not solved the problem at all.

Therefore, in order to use plastic products more reasonably, in the process of use, do not let the sun shine, do not let the rain, do not use at high temperatures, and do not often touch water or oil and so on. Of course, there is also a need to replace plastic products when they are aged, and the materials used in time are non-toxic.

Welcome to contact us right now!